Curved Curl Down Exhaust Tail Pipe - 50mm–68mm Fitting Range

The Blow Down 2 Stainless Steel Exhaust Tip is a universal Curved Curl Down exhaust tailpipe trim designed to improve the appearance of compatible downward-facing exhaust systems, particularly those commonly fitted to diesel cars, vans, 4x4s and commercial vehicles. Manufactured from polished stainless steel, this exhaust tip features a distinctive curved, downward-facing outlet that provides a clean, decorative finish.

Manufactured from durable stainless steel, the Blow Down 2 exhaust tip features a polished silver finish that provides an attractive appearance and excellent resistance to rust and corrosion. Its distinctive Curved Curl Down design incorporates an oval outlet measuring approximately 70mm x 90mm, with a 70mm round connection end and an overall length of 195mm.

Designed to fit over existing exhaust pipes with outside diameters between 50mm and 68mm, this universal exhaust trim provides a straightforward solution for upgrading worn, weathered or unattractive tailpipes. The supplied fixing hardware allows the tip to be secured without welding or drilling in compatible installations, making it suitable for professional workshops and DIY automotive maintenance.

The Blow Down 2 Curved Curl Down Exhaust Tip can be fitted by sliding it over the existing exhaust outlet and tightening the supplied fixings. For applications requiring a permanent installation, the exhaust tip may alternatively be welded into position by a suitably qualified person. Its polished stainless steel construction and curved downward-facing design make it particularly suitable for compatible diesel vehicle exhaust systems.

Key Features

• Blow Down 2 stainless steel exhaust tip
• Curved Curl Down exhaust tailpipe design
• Universal downward-facing exhaust trim
• Designed primarily for compatible diesel exhaust systems
• Manufactured from polished stainless steel
• Durable construction with excellent corrosion resistance
• Attractive polished silver finish
• Suitable for exhaust pipe diameters from 50mm to 68mm
• 195mm overall length
• 70mm x 90mm oval outlet
• 70mm round connection end
• Distinctive curved, downward-facing exhaust outlet
• Suitable for replacing or covering worn exhaust tailpipe ends
• Improves the appearance of existing exhaust systems
• Fixing hardware included
• Simple clamp-on installation
• No welding required for standard fitting
• No drilling required for compatible installations
• Can alternatively be welded for permanent installation
• Suitable for cars, vans, 4x4s and commercial vehicles
• Universal fitment according to exhaust pipe dimensions

Specifications

• Product Name: Blow Down 2
• Product Type: Exhaust Tip / Tailpipe Trim / Exhaust Finisher
• Design: Curved Curl Down / Downward Facing
• Material: Stainless Steel
• Finish: Polished
• Colour: Silver
• Outlet Shape: Oval / Curved Down
• Connection Shape: Round
• Compatible Exhaust Pipe Diameter: 50mm–68mm
• Oval Outlet Dimensions: 70mm x 90mm
• Round Connection End Diameter: 70mm
• Overall Length: 195mm
• Installation Method: Clamp-On / Bolt-On Fixing
• Fixings Included: Yes
• Welding Required: No
• Drilling Required: No
• Optional Permanent Installation: Welding
• Fitment: Universal by dimensions

Please Note: The 50mm–68mm measurement refers to the outside diameter of the existing exhaust pipe that the tip is designed to fit over. Please also check the available clearance around the exhaust outlet, bumper and surrounding bodywork before ordering.

Suitable Applications

• Curved Curl Down exhaust installations
• Downward-facing exhaust systems
• Diesel vehicle exhaust systems
• Exhaust tailpipe upgrades
• Replacement exhaust trims
• Exhaust tailpipe finishers
• Existing exhaust pipe refurbishment
• Decorative exhaust modifications
• Cars
• Diesel cars
• Vans
• Commercial vehicles
• 4x4 vehicles
• Pickup trucks
• SUVs
• Vehicle restoration projects
• Custom vehicle builds
• Garage and workshop installations
• DIY automotive maintenance
• General compatible exhaust tailpipe applications

Installation Guide

1. Check Exhaust Pipe Dimensions

Measure the outside diameter of your existing exhaust tailpipe and confirm that it falls within the 50mm–68mm fitting range. Check that sufficient clearance is available around the bumper and surrounding components.

2. Position the Exhaust Tip

Slide the Blow Down 2 Curved Curl Down Exhaust Tip over the end of the existing exhaust pipe, ensuring that it is correctly positioned and aligned with the downward-facing outlet.

3. Secure the Fixings

Tighten the supplied fixing hardware evenly until the exhaust tip is securely attached to the existing tailpipe.

4. Check the Installation

Ensure the exhaust tip is firmly mounted, correctly aligned and clear of surrounding bodywork. Periodically inspect and check the tightness of the fixings during normal vehicle maintenance.

5. Optional Permanent Installation

For a permanent mounting arrangement, the exhaust tip may alternatively be welded into position by a suitably qualified person.

Installation Note: Some exhaust pipes may require trimming if the original tailpipe is curved, angled or unsuitable for direct sleeve fitting. Cutting or additional modification should only be carried out after checking the exhaust layout and available clearance.

Important Information

This Curved Curl Down Exhaust Tip is a universal decorative exhaust component and is not a vehicle-specific replacement part. Compatibility depends on the existing exhaust pipe diameter, outlet position and available installation space.

The polished stainless steel construction provides excellent corrosion resistance, although periodic cleaning and maintenance are recommended to preserve its appearance.

Ensure the fitted exhaust tip does not contact the vehicle bodywork, obstruct the exhaust outlet or interfere with the safe operation of the exhaust system.

Supplied as Blow Down 2 Curved Curl Down Polished Stainless Steel Exhaust Tip with suitable mounting fixings, designed to fit compatible exhaust pipes measuring 50mm–68mm outside diameter. Featuring a 70mm x 90mm oval outlet, 70mm round connection end and 195mm overall length, this curved downward-facing exhaust trim is suitable for compatible diesel cars, vans, 4x4s and commercial vehicles. Please confirm your exhaust pipe dimensions and available installation space before ordering.

Securely packaged and dispatched same working day if purchased by 1 p.m.